《思科CISCO防火墙ASA5510重置密码》由会员分享，可在线阅读，更多相关《思科CISCO防火墙ASA5510重置密码（2页珍藏版）》请在装配图网上搜索。
1、ASA 5510
1.
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
2.rommon
rommon #1> confreg
Current Configuration Register: 0x00000001-------------asa
Configuration Summary:
boot default image from Flash
Do you wish to change this configuration y/n [n]
2、: y---------------
enable boot to ROMMON prompt y/n [n]: y
select specific Flash image index y/n [n]: n
disable system configuration y/n [n]: y ------------------
go to ROMMON prompt if netboot fails y/n [n]: y
enable passing NVRAM file specs in auto-boot mode y/n [n]: y
disable di
3、splay of BREAK or ESC key prompt during auto-boot y/n [n]: n
Current Configuration Register: 0x00102040---------------------
Configuration Summary:
boot ROMMON
ignore system configuration
load ROMMON if netboot fails
pass NVRAM file specs in auto-bootloader mode
Update Config Re
4、gister (0x102040) in NVRAM
3.asa
rommon #2> boot
4.
ciscoasa>enable
Password:()
ciscoasa#configure terminal
ciscoasa(config)#enable password XXX
5.copy
ciscoasa(config)# copy startup-config running-config
6.
Rack46ASA2(config)# config-register 0x01
7.
ciscoasa#reload
思科CISCO防火墙ASA5510重置密码
